UFF3-MM-20P series

Product ID：UFF3-MM-20P series
Interface:USB3.0 19p / 19p
Application: USB extension cable
Shelf time：2022-05-15
Product description: USB 3.0 Int.19p male to Int.19p male Flat Cable

WebStore

USB 3.0 Int.19p male to Int.19p male Flat Cable

Brand name: ADTLINK

Product name: USB 3.0 Int.19p male to Int.19p male Flat Cable

Product model: UFF3-MM-20P

Transfer speed: support of increased bandwidth up to USB3.0 , 5G/bps (max.)

Wire length: 3~300 cm, the length can be customized

Current capacity: 5V/3A within 50cm, 5V/1.5A within 1 meter

Product application: USB 3.0 internal 19/20Pin front panel connector extension cable

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.

Purchase restriction: This product is designed to connect to built-in USB devices. It is not suitable for general external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. This product has a fragile structure and is not suitable for civilian use. It is not easy to use for general purposes and does not support returns and exchanges. Please consider carefully before placing an order.

ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Brand	Part-number	Product-Description
ADTLINK	UF1C-UF1D	USB 3.0 Int.19p male to Int.19p male Flat Cable
ADTLINK	UF1C-UF1D-DL	USB 3.0 Int.19p male to Int.19p male Flat Cable
ADTLINK	UF1C-UF1C	USB 3.0 Int.19p male to Int.19p male Flat Cable
ADTLINK	UF1C-UF1C-DL	USB 3.0 Int.19p male to Int.19p male Flat Cable

What is the difference between F1C-F1C signal direct connection and F1C-F1D signal exchange?
USB Tx-Tx and Rx-Rx of F1C-F1C are signal direct connection, and USB TX-Rx and Rx-Tx of F1C-F1D are signal exchange

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the blue arrow in the figure below.

Q&A:

Is there any EMI shielding for Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.